[AusNOG] Small box for wanem

[Shaffi Khan]

There's been a few comparisons of various SBC units for iPerf testing done over the years, one such being https://netbeez.net/blog/iperf-comparison-between-raspberry-pi3-b-nanopi-up-board-odroid-c2/

Shaffi

-----Original Message-----
From: AusNOG <ausnog-bounces at lists.ausnog.net> On Behalf Of Richard Nelson
Sent: Tuesday, 5 February 2019 1:56 PM
To: ausnog at lists.ausnog.net
Subject: Re: [AusNOG] Small box for wanem

Intel based solutions:

We have several Up-boards https://up-shop.org/.  Ours are single interface but there are dual Nic versions.  We like them.

The recent Odroid-H2 looks nice
https://www.hardkernel.com/shop/odroid-h2/  But they sold out really fast and they haven't got more stock yet.

If you want more interfaces Qotom make interesting looking boxes. 
https://qotom.aliexpress.com/store/108231 . The four and six interface versions have Intel Nics and should support DPDK if that is useful.

Richard

On 5/02/19 4:45 PM, Ian Henderson wrote:
> Hi folks,
>
> I need to build up a simple, small wanem/iperf box for a few projects 
> coming up. Initial thought was to go with a pi 3B+ and USB3 1000BaseT 
> adaptors, but the throughput looks to be limited to approx 300Mbit[1].
> Thinking about a NUC with four USB3.1 Gen 2 1000BaseT adaptors (run 
> two separate emulation 'sessions' at once). Anybody got any other 
> suggestions/products that have worked well? Doesn't need to be super 
> hardcore, it'll definitely be FOSS based.
>
> While I'm on the topic, is wanem still the best choice for 
> throughput/latency/jitter/loss/etc simulation?
>
> Rgds,
>
>
>
> - I.
>
> [1]: 
> https://www.jeffgeerling.com/blogs/jeff-geerling/getting-gigabit-netwo
> rking _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog