[AusNOG] Small box for wanem

[Nathan Collins]

I'm running a couple of APU boards for various network related projects and have found them to be very reliable, and well priced.


https://www.pcengines.ch/apu2.htm



<https://www.pcengines.ch/apu2.htm>

________________________________
From: AusNOG <ausnog-bounces at lists.ausnog.net> on behalf of Ian Henderson <ianh at ianh.net.au>
Sent: Tuesday, 5 February 2019 2:45:32 PM
To: <ausnog at lists.ausnog.net>
Subject: [AusNOG] Small box for wanem

Hi folks,

I need to build up a simple, small wanem/iperf box for a few projects
coming up. Initial thought was to go with a pi 3B+ and USB3 1000BaseT
adaptors, but the throughput looks to be limited to approx 300Mbit[1].
Thinking about a NUC with four USB3.1 Gen 2 1000BaseT adaptors (run
two separate emulation 'sessions' at once). Anybody got any other
suggestions/products that have worked well? Doesn't need to be super
hardcore, it'll definitely be FOSS based.

While I'm on the topic, is wanem still the best choice for
throughput/latency/jitter/loss/etc simulation?

Rgds,



- I.

[1]: https://www.jeffgeerling.com/blogs/jeff-geerling/getting-gigabit-networking
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20190205/c621ab92/attachment.html>