[AusNOG] NBN NCAS on Cisco 867VAE-K9

[Simon Attwell]

Jarryd,

That seems to conflict with the information available from Cisco.
The 867VAE and the 867VAE-W both have VAE2_A_39t_B39d_24m.SSA.bin available
as a firmware option for the onboard VDSL2 modem.

Personally I run the 887VA-W-A-K9 in most customer scenarios.

- Simon

--

Simon Attwell

Senior Systems and Network Engineer

Attwell's Technical Services Pty Ltd

Mobile: 0409 756 819

Email: simon at attwell.net


On Tue, 9 Apr 2019 at 13:42, Jarryd Sullivan <Jarryd.Sullivan at area9.com.au>
wrote:

> Can confirm that the 867VAE-K9 in any form will not work, only the later
> wireless model that was released had the ability to have the VDSL
> controller firmware updated which supported vectoring. The non-wireless
> models are basically pointless now. We’ve moved to C887VA’s for all our
> small deployments where the 867 used to fit.
>
> Jarryd Sullivan
>
>
> From: AusNOG <ausnog-bounces at lists.ausnog.net> On Behalf Of Pouya Madani
> Sent: Tuesday, 9 April 2019 11:58 AM
> To: ausnog at lists.ausnog.net
> Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9
>
> Hi,
>
> Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the
> 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)]
>
> I have almost tried any recommendations on AusNog, Whirpool, Cisco and
> many other Communities with no luck. I understand 867VAE chipset is
> different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but
> the 867VAE-K9 has not worked for me yet.
>
> Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I
> have a copy of the vdsl controller and ethernet0.100 config please?
>
> Kind Regards,
> Pedro Madani
>
> ________________________________
>
> The information contained in this message and any attachments may be
> confidential information. If you are not the intended recipient, you must
> not use or forward the information contained in these documents. If you
> have received this message in error, please delete the email and notify the
> sender.
>
> Internet communications are not secure. You should scan this message and
> any attachments for viruses. Under no circumstances do we accept liability
> for any loss or damage which may result from your receipt of this message
> or any attachments.
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20190409/65637934/attachment.html>