[AusNOG] Cisco 1921 + VDSL2 EHWIC

[Tushar Singla]

dialer persistent ?

Regards
Tushar Singla


On 17 August 2016 at 16:33, Guy Ellis <guy at traverse.com.au> wrote:

> Hi Aurelle,
>
> Does the firmware you are using support vectoring?
>
> If not then this might explain the behaviour of the CO.
>
> Kind regards,
>  - Guy.
>
>
> On 17/08/2016 4:22 PM, aurelle mon wrote:
>
> Hi
>
> Got a client with a  Cisco 1921 with VDSL2 EHWIC (both brand new and under
> smartnet)
>
> NBN FTTN cabinet drops sync after 30 seconds, thinking it is the firmware
> (vdsl.bin-A2pv6C035j) (have sra turned on)
>
> Seems the update compatible firmware is linked only to 887VA (
> https://software.cisco.com/download/release.html?mdfid=
> 283122091&softwareid=282821780&release=VA_A_39d_B_
> 38h3_24h1&relind=AVAILABLE&rellifecycle=&reltype=latest)
>
> Have logged ticket with Cisco (going around in circles)
>
> does any body have any tips or advise
>
>
>
> _______________________________________________
> AusNOG mailing listAusNOG at lists.ausnog.nethttp://lists.ausnog.net/mailman/listinfo/ausnog
>
>
>
> --
> Guy Ellisguy at traverse.com.auwww.traverse.com.au
> T: +61 3 9489 6678 M: +61 419 398 234
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20160817/1e55d07e/attachment.html>