[AusNOG] Cisco 1921 + VDSL2 EHWIC

[Guy Ellis]

Hi Aurelle,

Does the firmware you are using support vectoring?

If not then this might explain the behaviour of the CO.

Kind regards,
  - Guy.

On 17/08/2016 4:22 PM, aurelle mon wrote:
> Hi
>
> Got a client with a  Cisco 1921 with VDSL2 EHWIC (both brand new and 
> under smartnet)
>
> NBN FTTN cabinet drops sync after 30 seconds, thinking it is the 
> firmware (vdsl.bin-A2pv6C035j) (have sra turned on)
>
> Seems the update compatible firmware is linked only to 887VA 
> (https://software.cisco.com/download/release.html?mdfid=283122091&softwareid=282821780&release=VA_A_39d_B_38h3_24h1&relind=AVAILABLE&rellifecycle=&reltype=latest)
>
> Have logged ticket with Cisco (going around in circles)
>
> does any body have any tips or advise
>
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog


-- 
Guy Ellis
guy at traverse.com.au
www.traverse.com.au
T: +61 3 9489 6678 M: +61 419 398 234

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20160817/f50e926a/attachment.html>