[AusNOG] NBN FTTN And Migrations and End User Equipment

[Chris Gibbs]

There was talk at one point of all RSP's being provided the blessed list
based on what had been certified in the sandpit. Not sure if that got
through the PDF though.
On 14 Dec 2015 6:43 pm, "Damien Gardner Jnr" <rendrag at rendrag.net> wrote:

> The RSP supplies the CPE, not the customer.  According to telstra (and
> other sources on whingepool), if you have a problem, the RSP cannot lodge a
> fault to NBNco unless the RSP-supplied unit is plugged in first, as that is
> what is on the nbn approved list.  The approval testing that the RSP has to
> go through *includes* the firmware version.   Now if only NBNco made that
> approval list public...
>
> On 14 December 2015 at 18:38, Joseph Goldman <joe at apcs.com.au> wrote:
>
>> I don't know all your questions answers but I have heard that VDSL will
>> not have an NTD, I.e. it will be standard 'phone line' hand off.
>>
>> It's also important to note that nbn will require vectoring so make sure
>> the cpe you buy / tell your customers to buy supports it, no vectoring no
>> connection.
>>
>> I heard this from an nbnco employee in a semi anonymous format so I'm not
>> sure if this is backed up by public documents.
>> On Mon, Dec 14, 2015 at 6:34 PM, Bradley Amm <
>> Bradley.Amm at telethonkids.org.au> wrote:
>>
>> Hey Guy
>>
>>
>>
>> I have been wondering?
>>
>>
>>
>> How are NBN going to migrate users from a current working ADSL and phone
>> to the FTTN NBN
>>
>>
>>
>> EG. I have a Telstra phone and working Bigpond ADSL.
>>
>>
>>
>> Now NBN FTTN comes along. Now I assume NBN are building the Nodes in
>> areas where lots of phone lines converge and meet up EG Street Ends and
>> intersections etc.
>>
>>
>>
>> Will NBN just leave my phone line connected to the Exchange and when I
>> request to be migrated will they basically chop my line at the cabinet and
>> plug me into the cabinet.
>>
>> What will happen to the dial tone in that instance. Will it be provided
>> from the cabinet or will it still come from the exchange.
>>
>>
>>
>> Also what will happen at the end users house. Will they have an NTD or
>> will they just need a VDSL2 modem. Any ideas what VDSL2 modems are on the
>> market?
>>
>>
>>
>>
>>
>> Thanks
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>
>>
>
>
> --
>
> Damien Gardner Jnr
> VK2TDG. Dip EE. GradIEAust
> rendrag at rendrag.net -  http://www.rendrag.net/
> --
> We rode on the winds of the rising storm,
>  We ran to the sounds of thunder.
> We danced among the lightning bolts,
>  and tore the world asunder
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20151214/67c4fa41/attachment.html>