[AusNOG] Cheapest half decent 10Gbps switch (for iSCSI only)

[Skeeve Stevens]

Tell us about your packet buffers.

I'd (and we'd) actually like to know.


...Skeeve


--

Skeeve Stevens - The ISP Guy

Email: skeeve at theispguy.com ; Twitter: @TheISPGuy
<http://t.strk03.email/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XX43LyyXnW4X9_h03N1zK2W653gwx56dStDf4-GSnR02?t=https%3A%2F%2Ftwitter.com%2FTheISPGuy&si=4640016326721536&pi=24cc79ff-bd5d-462b-d327-dadff8b552ca>
Blog: TheISPGuy.com
<http://t.strk03.email/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XX43LyyXnW4X9_h03N1zK2W653gwx56dStDf4-GSnR02?t=http%3A%2F%2Ftheispguy.com%2F&si=4640016326721536&pi=24cc79ff-bd5d-462b-d327-dadff8b552ca>
;
Facebook: TheISPGuy
<http://t.strk03.email/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XX43LyyXnW4X9_h03N1zK2W653gwx56dStDf4-GSnR02?t=https%3A%2F%2Fwww.facebook.com%2Ftheispguy&si=4640016326721536&pi=24cc79ff-bd5d-462b-d327-dadff8b552ca>

Linkedin: /in/skeeve
<http://t.strk03.email/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XX43LyyXnW4X9_h03N1zK2W653gwx56dStDf4-GSnR02?t=http%3A%2F%2Fwww.linkedin.com%2Fin%2Fskeeve&si=4640016326721536&pi=24cc79ff-bd5d-462b-d327-dadff8b552ca>
 ; Expert360: Profile
<http://t.strk03.email/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XX43LyyXnW4X9_h03N1zK2W653gwx56dStDf4-GSnR02?t=https%3A%2F%2Fexpert360.com%2Fprofile%2Fd54a9&si=4640016326721536&pi=24cc79ff-bd5d-462b-d327-dadff8b552ca>


On Mon, Apr 20, 2015 at 11:19 AM, Josh Tipping <josh.tipping at icita.com>
wrote:

>  I can give you pricing and info on some Huawei switching options if you
> like (disclose: we are a disty). Nothing down near the netgear stuff
> however, but you’d be looking at 24x10GE @ wire speed well under half the
> cost of the cisco/juniper options you’ve mentioned. Contact me off list if
> you are interested.
>
>
>
> Cheers,
>
>
>
> *Josh Tipping *
>
>
>
> *From:* AusNOG [mailto:ausnog-bounces at lists.ausnog.net] *On Behalf Of *James
> Cunningham
> *Sent:* Sunday, 19 April 2015 12:48 PM
> *To:* ausnog at lists.ausnog.net
> *Subject:* [AusNOG] Cheapest half decent 10Gbps switch (for iSCSI only)
>
>
>
> Hi Guys,
>
>
>
> Not sure if this is the correct place to ask this question, so apologies
> in advance - but since most people here run high speed storage networks it
> is probably relevant.
>
>
>
> Can I have some recommendations for low end, cost effective, 10Gbps
> switches (for iSCSI use)?
>
>
>
> Only need around 8-10 ports per switch, and all the switches I'm looking
> at from the likes of Cisco and Juniper are around $20k-$30k a switch -
> seems pretty extreme really. I'm looking at deploying 2 x 10Gbps iSCSI
> switches for a client for a small VMware project, and am looking for
> suitable switches.
>
>
>
> Looking for suggestions for a half decent switch to use here - doesn't
> have to be top of the line with heaps of features, just something very
> basic, as long as it's 10Gbps and has at least 8 ports.
>
>
>
> Looking at the Netgear XS712T, these are around the $2k mark, which is in
> the ballpark of what I need. Looked at the Netgear XSM7224 and DELL N4032,
> but these are around the $5k mark per switch (but granted 24 ports with
> dual power supplies)
>
>
>
> Suggestions anyone?
>
>
>
> Thanks
>
>
>
> James
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20150420/73c23a38/attachment.html>