[AusNOG] 3g/nextg

[John Brandis]

Hi All,



Anyone got a hold of the latest release of Cisco 3g/nextG style of HWIC?
Thanks for any feedback as to how they go.



Below is the blurb I found



"In Late March/Early April, we will be releasing HWIC-3G-HSPA (codenamed
ENZO2). This 2nd Generation hardware uses a new chipset that offers some
uplink performance increases. Frequency support is IDENTICAL -
WCDMA/UMTS networks on the 850MHz and 2100MHz band. This makes it
suitable for TELSTRA in ALL AREAS (850MHz), and  VODAFONE and OPTUS in
METRO AREAS ONLY (2100MHz). The speeds supported on this module are up
to 1.9Mbps Uplink (HSUPA), and up to 7.2Mbps Downlink (HSDPA)."



Uplink speed - 1.9Mbps

Downlink speed - 7.2Mbps





________________________________________________________________________________
NOTICE

This email (and any attachments) is confidential, and may also contain legally privileged information and/or copyright material. You may not read, print, copy, use, distribute or disclose this email or its contents unless you are the addressee or person responsible for delivering this email to the addressee. If you are not the intended recipient, please notify BBSAA immediately by telephone and then delete this email and any attachments. BBSAA does not accept any liability for any loss or damage caused by receipt of this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20090507/91f093f0/attachment.html>