[AusNOG] Microsoft bilateral peer issues via Megaport Melbourne

[Gavin Tweedie]

Hey Philip, David,

We've had a couple of reports but nothing wide-spread. I've given a couple
of Microsoft people a nudge and they are also making sure the right people
are having a look.

Gavin

On Thu, 4 Jun 2020 at 10:29, David Allen <david at virtutel.com.au> wrote:

> Hi Philip,
>
> Can confirmed we have experienced the same issue and I have a ticket
> lodged with both Megaport and Microsoft over it. It seems to be fine over
> Equinix IX however.
>
> Regards
> David
>
>
>
> Kind regards,
>
> *David Allen | Director, CTO*
> P: 1300 655 132 or +61 3 9999 8800 F: +61 3 9999 8899
> E: david at virtutel.com.au W: www.virtutel.com.au
> A: Level 9, 401 Collins Street, Melbourne, Victoria, 3000, Australia
>
>
>
>
>
> This e-mail message and any accompanying attachments may contain
> confidential information. If you are not the intended recipient, do not
> read, use, disseminate, distribute or copy this message or attachments. If
> you have received this message in error, please notify the sender
> immediately and delete this message. Any views expressed in this message
> are those of the individual sender, except where the sender expressly, and
> with authority, states them to be the views of Virtutel Before opening any
> attachments, please check them for viruses and defects.
>
> On 4 Jun 2020, at 12:13 pm, Philip Loenneker <
> Philip.Loenneker at tasmanet.com.au> wrote:
>
> Good morning everyone,
>
> We became aware of issues this morning for clients on our network reaching
> some Azure workloads and Office365 services. Traffic was reaching the
> remote end of our bilateral peer with Microsoft over Megaport Melbourne,
> but we had connectivity issues reaching hops past that. We stopped sending
> and receiving routes via this peer (keeping the BGP peer up for testing
> purposes) and after a few minutes most services appeared to be back to
> normal, with the traffic currently preferring a path via NSW-IX.
>
> Since then however, we’re still having issues with Azure workloads in
> AU-SE region. We’re seeing 42% error rate in initiating connections to some
> VMs.
>
> I’ve logged a fault directly with Microsoft, and they are investigating,
> but I was wondering if anyone else is having similar issues that could help
> to isolate the cause. I can share the incident number with others
> experiencing problems if it is helpful.
>
> Regards,
> *Philip Loenneker | Senior Network Engineer** | TasmaNet*
> 40-50 Innovation Drive, Dowsing Point, Tas 7010, Australia
> P: 1300 792 711
> philip.loenneker at tasmanet.com.au
> www.tasmanet.com.au
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>


-- 
Global Interconnection Director
Megaport <https://www.megaport.com>
+61 424 229 127
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20200604/a7bf7456/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 10801 bytes
Desc: not available
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20200604/a7bf7456/attachment.jpg>