[AusNOG] Cisco 10Gb switches

[Philip Loenneker]

Actually if you want to see the full range of devices featuring “multigigabit”, check out here:
https://www.cisco.com/c/en/us/solutions/enterprise-networks/catalyst-multigigabit-switching/

Some only have a handful of 10G ports for uplinks, not designed for edge ports.

Regards,
Philip Loenneker | Network Engineer | TasmaNet

From: AusNOG <ausnog-bounces at lists.ausnog.net> On Behalf Of Philip Loenneker
Sent: Friday, 15 February 2019 3:35 PM
To: Cameron Lowe <cameron at cameronlowe.com>; AusNOG at lists.ausnog.net
Subject: Re: [AusNOG] Cisco 10Gb switches

Several of the Cisco 3850 series have 10G copper ports.
https://www.cisco.com/c/en/us/products/switches/catalyst-3850-series-switches/

Regards,
Philip Loenneker | Network Engineer | TasmaNet

From: AusNOG <ausnog-bounces at lists.ausnog.net<mailto:ausnog-bounces at lists.ausnog.net>> On Behalf Of Cameron Lowe
Sent: Friday, 15 February 2019 3:16 PM
To: AusNOG at lists.ausnog.net<mailto:AusNOG at lists.ausnog.net>
Subject: [AusNOG] Cisco 10Gb switches

Hi,

My google fu is failing me. Does anyone have any recommendations for Cisco 10Gb switches? They must have 10Gb over Cat6 (not my decision) and run some variant of ios. The uplinks can be SFP+. They only need 16 ports.

Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20190215/7065e14d/attachment.html>