[AusNOG] VDSL2 SFP Modem

[Damien Gardner Jnr]

As an addon to the above, they only support bridging of 2-3 MAC addresses.
Which is probably not an issue with a single device, but it's insanely
annoying if you run multiple devices doing PPPOE behind a bridged modem.

So I'm curious.. What ARE folks using as a bridged VDSL modem that supports
tiny jumbo frames? (Which was the main reason I went for the VDSL SFP in
the first place..)

On Fri, 16 Aug 2019 at 16:41, Guy Ellis <guy at traverse.com.au> wrote:

> Hi Shane,
>
> We have tested these in our lab - the VDSL performance is acceptable.
>
> However there are a couple of downsides...
>
> (i) No DSL configuration
> (ii) No Stats, not even line sync
> (iii) Price
> (iv) They use a fair bit of power, and the host mainboard must have a
> clean well filtered 3.3V supply delivered to the SFP slot.
>
> We were unable to get ADSL working, not sure if that was firmware or (i)
> above.
>
> Due to (i) .. (iv) we have moved to a different Internal VDSL solution.
>
> Kind regards,
>
> - Guy.
>
>
> On 16/08/2019 4:18 pm, Shane Chrisp wrote:
> > Hi,
> >
> >  I just became aware of these VDSL2 SFP modems and I was wondering if
> > anyone has tried these or a similar device from another supplier in AU
> > and if so how they performed?
> >
> --
> Guy Ellis
> Mobile +61 419 398 234
> AU 03 9489 6678
> NZ 09 884 9756
> www.traverse.com.au
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>


-- 

Damien Gardner Jnr
VK2TDG. Dip EE. GradIEAust
rendrag at rendrag.net -  http://www.rendrag.net/
--
We rode on the winds of the rising storm,
 We ran to the sounds of thunder.
We danced among the lightning bolts,
 and tore the world asunder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20190826/2fcd28c2/attachment.html>