[AusNOG] NBN NWAS and Cisco PPPoE

Glenn Lake glenn.lake at team.e-vision.com.au
Fri Jan 12 14:59:25 EST 2018


This sounds like a different issue we have seen in the past with different CPE vendors where they were sending   LCP packets with a class of service other than best efforts (0) - while this worked with some PPoE sessions, it failed on others with AAPT.   Configuring the CPE to send only LCP with best efforts overcame that particular issue.


Not sure if this is related - but given when you try with other equipment it works straight away - it sounded familiar.


Glenn Lake

________________________________
From: AusNOG <ausnog-bounces at lists.ausnog.net> on behalf of Nathan Brookfield <Nathan.Brookfield at simtronic.com.au>
Sent: Friday, 12 January 2018 2:43:18 PM
To: Liam Best; ausnog at lists.ausnog.net
Subject: Re: [AusNOG] NBN NWAS and Cisco PPPoE


Hi Liam,



I believe this is the result of a software upgrade on NBN NWAS towers last week and this is a known issue, NBN are working with Cisco and the wireless vendors but this was something that has occurred and is wide spread for all Cisco NWAS users.



Kindest Regards,

Nathan Brookfield (VK2NAB)



Chief Executive Officer

Simtronic Technologies Pty Ltd



Local: (02) 4749 4949 | Fax: (02) 4749 4950 | Direct: (02) 4749 4951

Web: http://www.simtronic.com.au<http://www.simtronic.com.au/> | E-mail: nathan.brookfield at simtronic.com.au<mailto:nathan.brookfield at simtronic.com.au>



[cid:image001.png at 01D38BB3.AEA349A0]

CONFIDENTIALITY & PRIVILEGE NOTICE

The information contained in this email and any attached files is strictly private and confidential. The intended recipient of this email may only use, reproduce, disclose or distribute the information contained in this email and any attached files with Simtronic Technologies Pty Ltd’s permission. If you are not the intended recipient, you are strictly prohibited from using, reproducing, adapting, disclosing or distributing the information contained in this email and any attached files or taking any action in reliance on it. If you have received this email in error, please email the sender by replying to this message, promptly delete and destroy any copies of this email and any attachments.

It is your responsibility to scan this communication and any files attached for computer viruses and other defects and recommend that you subject these to your virus checking procedures prior to use. Simtronic Technologies Pty Ltd does NOT accept liability for any loss or damage (whether direct, indirect, consequential, economic or other) however caused, whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached.



From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Liam Best
Sent: Friday, January 12, 2018 2:38 PM
To: ausnog at lists.ausnog.net
Subject: [AusNOG] NBN NWAS and Cisco PPPoE



Reaching out to see if anyone can shed some light on an issue we are encountering with NBN NWAS and Cisco routers.



We have two clients on NBN NWAS services, both using Cisco 1941 routers, both on opposite ends of Melbourne.

The carrier is AAPT for both services.



Just over a month ago, both services stopped working with our config, however the service works with a Juniper SSG5 - also works with a Windows laptop directly connected to the NTU (and even an old D-LINK).



We have also tried a Cisco 800 series router, but same issue occurs.



>From the Cisco log:



000124: *Jan 11 09:31:29.323:  Sending PADI: Interface = GigabitEthernet0/0

000125: *Jan 11 09:31:29.619: PPPoE 0: I PADO  R:f8c2.8864.e230 L:1cdf.0ff7.c640 Gi0/0

000126: *Jan 11 09:31:31.627:  PPPOE: we've got our pado and the pado timer went off

000127: *Jan 11 09:31:31.627: OUT PADR from PPPoE Session

000128: *Jan 11 09:31:31.659: PPPoE 0: I PADS  R:f8c2.8864.e230 L:1cdf.0ff7.c640 Gi0/0

000129: *Jan 11 09:31:31.659: IN PADS from PPPoE Session

000130: *Jan 11 09:31:31.659:  PPPoE : Shutting down client session

000131: *Jan 11 09:31:31.659:  PPPoE : Failed to notify platform about session shutdown, no vaccess swidb

000132: *Jan 11 09:31:31.659: [0]PPPoE 0:

router#O PADT  R:0000.0000.0000 L:0000.0000.0000 Gi0/0



All other NBN services work with this config, it just seems to be the combination of our Cisco config and NWAS.



These services were working with this hardware and same config for around 3-4 months after the service was activated.



If anyone has a working sample config for Cisco routers on NBN NWAS, or any ideas to what might cause this, it would be much appreciated.



Liam Best



[cid:image007.png at 01D38BB3.AE9EDCD0]


Centorrino Technologies Pty Ltd | 11/9 Dawson Street Coburg VIC 3058 Australia


P: 1300 852 110 | Fax: 03 9354 3060 | lbest at ct.com.au<mailto:lbest at ct.com.au> | www.ct.com.au<http://www.ct.com.au/>





[cid:image008.jpg at 01D38BB3.AE9EDCD0]<http://facebook.com/CentorrinoTech>  [cid:image009.jpg at 01D38BB3.AE9EDCD0] <http://www.linkedin.com/company/centorrino-technologies>  [cid:image010.jpg at 01D38BB3.AE9EDCD0] <https://twitter.com/centtech>  [cid:image011.jpg at 01D38BB3.AE9EDCD0] <http://www.youtube.com/channel/UCrRxQRcLinKOe-KCNLW1W2w>




________________________________
Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering.
http://www.mailguard.com.au

Report this message as spam<https://console.mailguard.com.au/ras/1St2fGnP6X/667cvBTPQZNxixIDit2xkS/1>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20180112/bc76753c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image007.png
Type: image/png
Size: 31455 bytes
Desc: image007.png
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20180112/bc76753c/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image008.jpg
Type: image/jpeg
Size: 914 bytes
Desc: image008.jpg
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20180112/bc76753c/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image009.jpg
Type: image/jpeg
Size: 886 bytes
Desc: image009.jpg
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20180112/bc76753c/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image010.jpg
Type: image/jpeg
Size: 899 bytes
Desc: image010.jpg
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20180112/bc76753c/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image011.jpg
Type: image/jpeg
Size: 912 bytes
Desc: image011.jpg
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20180112/bc76753c/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 19799 bytes
Desc: image001.png
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20180112/bc76753c/attachment-0001.png>


More information about the AusNOG mailing list