[AusNOG] UPS Compatibility with ESXI 6.5 Communication

[Robert Hudson]

Most UPSs can send a signal around their power state via serial or USB.

ESXi has, if I recall correctly, the ability to recognise this. Some
vendors have additional software to make it work better.

The trick becomes being able to shut the VMs down (and then the host)
before power is lost. I am not sure that free ESXi can do this natively -
but you may be able to script it via the vCLI/etc.

The Internet seems to have a little bit of info that may prove useful:
http://bfy.tw/Gp3C

Regards,

Robert

On 27 Feb. 2018 11:31 am, "Daniel Watson" <daniel.watson at zax.com.au> wrote:

> Hi Members,
>
>
>
> Just seeking some input on/off list for recommendations for any entry
> level’ish UPS’s that would be compatible with communication through USB to
> shutdown an ESXI environment upon loss of power.
>
>
>
> I have taken a decent look around at some of the available models on the
> current market and most of them do not talk about virtualized environments
> which makes this a bit hard,
>
>
>
> Any tips or pointers on/off list would be appreciated.
>
>
>
> Looking around 900 – 1500 VA
>
>
>
> DW
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20180227/2603d86c/attachment.html>