[AusNOG] NBN Layer 2 PtP

Sat Nov 11 18:21:36 EST 2017

Perhaps using a pair of MikroTik routers and setting up an Ethernet over IP tunnel?

Obviously no QoS and the like but at least you've got a L2 connection.

________________________________
From: Peter Tiggerdine <ptiggerdine at gmail.com>
Sent: 11 Nov 2017 5:05 pm
To: Lee Allemand
Cc: ausnog at lists.ausnog.net
Subject: Re: [AusNOG] NBN Layer 2 PtP

What's the technical requirement for layer2 outside the datacenter? I suspect there is a better way.

Regards,

Peter Tiggerdine

On Nov 10, 2017 11:25, "Lee Allemand" <lallemand at christiecorporate.com.au<mailto:lallemand at christiecorporate.com.au>> wrote:
Thanks Nathan,

Might have a chat to Telstra wholesale, the site is NBN FTTP and is really the only option at this point.

Warm Regards,
Lee Allemand
IT Support

Christie Group
Level 1, 320 Adelaide St
Brisbane QLD 4000
Desk: 07 3905 9020
Mobile: 0434 777 892

From: Nathan Brookfield [mailto:Nathan.Brookfield at simtronic.com.au<mailto:Nathan.Brookfield at simtronic.com.au>]
Sent: Friday, 10 November 2017 11:22 AM
To: Lee Allemand <lallemand at christiecorporate.com.au<mailto:lallemand at christiecorporate.com.au>>; 'ausnog at lists.ausnog.net<mailto:ausnog at lists.ausnog.net>' <ausnog at lists.ausnog.net<mailto:ausnog at lists.ausnog.net>>
Subject: RE: NBN Layer 2 PtP

Hi Lee,

This isn’t a product as such, Telstra can provide you a dedicated 50/50 but only on FTTP and it’s quite expensive due to the traffic class.  In 99% of cases you would be MUCH better off price and delivery wise to use an Ethernet service from Telstra/AAPT/Vocus etc instead.

Kindest Regards,
Nathan Brookfield (VK2NAB)

Chief Executive Officer
Simtronic Technologies Pty Ltd

Local: (02) 4749 4949 | Fax: (02) 4749 4950 | Direct: (02) 4749 4951
Web: http://www.simtronic.com.au<http://www.simtronic.com.au/> | E-mail: nathan.brookfield at simtronic.com.au<mailto:nathan.brookfield at simtronic.com.au>

CONFIDENTIALITY & PRIVILEGE NOTICE

The information contained in this email and any attached files is strictly private and confidential. The intended recipient of this email may only use, reproduce, disclose or distribute the information contained in this email and any attached files with Simtronic Technologies Pty Ltd’s permission. If you are not the intended recipient, you are strictly prohibited from using, reproducing, adapting, disclosing or distributing the information contained in this email and any attached files or taking any action in reliance on it. If you have received this email in error, please email the sender by replying to this message, promptly delete and destroy any copies of this email and any attachments.

It is your responsibility to scan this communication and any files attached for computer viruses and other defects and recommend that you subject these to your virus checking procedures prior to use. Simtronic Technologies Pty Ltd does NOT accept liability for any loss or damage (whether direct, indirect, consequential, economic or other) however caused, whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached.

From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Lee Allemand
Sent: Friday, November 10, 2017 12:14 PM
To: 'ausnog at lists.ausnog.net<mailto:ausnog at lists.ausnog.net>' <ausnog at lists.ausnog.net<mailto:ausnog at lists.ausnog.net>>
Subject: [AusNOG] NBN Layer 2 PtP

Morning (Afternoon),

I’m after a point to point layer 2 over NBN, ideally from NextDC B1, would anyone be kind enough to point me to someone who can supply this?

Off list is preferred.

Thanks J

Warm Regards,
Lee Allemand

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net<mailto:AusNOG at lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20171111/cf415739/attachment.html>