[AusNOG] vyos | more than 2 member interface in a bonded interface

Mark Anthony Delfin mark at delfin.me
Wed Jan 11 13:59:20 EST 2017


Hi Ausnog,

Forgive me if this query is inappropriate.

I am trying to add 4 gigabit ports in a bonded interface but it seems
unstable if there are more than 2 enabled  member interfaces in the group.


set interfaces bonding bond1 address 'x.x.x.x/24'
set interfaces bonding bond1 hash-policy 'layer2'
set interfaces bonding bond1 mode '802.3ad'
set interfaces ethernet eth6 bond-group 'bond1'
set interfaces ethernet eth6 description 'member of bond1'
set interfaces ethernet eth7 bond-group 'bond1'
set interfaces ethernet eth7 description 'member of bond1'
set interfaces ethernet eth10 bond-group 'bond1'
set interfaces ethernet eth10 description 'member of bond1'
set interfaces ethernet eth11 bond-group 'bond1'
set interfaces ethernet eth11 description 'member of bond1'

The vyos machine is connected to a juniper ex4200 virtual chassis (2
members)


set interfaces ge-0/0/40 ether-options 802.3ad ae4
set interfaces ge-0/0/41 ether-options 802.3ad ae4
set interfaces ge-1/0/40 ether-options 802.3ad ae4
set interfaces ge-1/0/41 ether-options 802.3ad ae4
set interfaces ae4 aggregated-ether-options minimum-links 1
set interfaces ae4 aggregated-ether-options lacp active

The same settings on the Juniper EX4200 doesn't have any issue on a
non-vyos device.  Is this a limitation on the vyos?

Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20170111/f6b8bac2/attachment.html>


More information about the AusNOG mailing list