[AusNOG] Telstra FTTN Voice

[James Gray]

Not much help to you, but I know you can "extract" the SIP details from the
Optus Sagem gateways and transpose it successfully to a SIP-phone or
SIP-ATA device etc, and use your own gateway for the VDSL end-point etc. If
you're not under contract, it might be an option.

Cheers,

James

On 16 November 2016 at 13:22, Bradley Amm <Bradley.Amm at telethonkids.org.au>
wrote:

> Hey Guys and Girls
>
>
>
> I have a general question that you guys might have solved
>
>
>
> I have Telstra FTTN NBN
>
>
>
> To get Telstra Voice I need to use their horrible Gateway.
>
> I want to be able to use my own modem/router and configure the voice on a
> ATA
>
>
>
> I can see the details on the configuration page but Telstra refuse to give
> out the password.
>
> The settings look similar to SIP connect services I have setup in the past
> so it’s not a stretch to get the details I want
>
>
>
> Has anyone been successful in getting the details or extracting the
> details from the modem.
>
>
>
> The only reason I use it is
>
> 1. The wife uses normal phones
>
> 2. Old people don’t like ringing mobiles so parents call the house phone
>
>
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20161116/ef2757a3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 66222 bytes
Desc: not available
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20161116/ef2757a3/attachment.png>