[AusNOG] Network analyser

[Damien Gardner Jnr]

Well vyatta is just linux, so shove some iptables count rules on there, do
an hourly/daily/whatever cronjob to poll them, POST the values to a php
script elsewhere, and then clear them, and you're done.

On 9 November 2016 at 17:02, Jason Firmino <jason.firmino at gmail.com> wrote:

> Hey Mark,
>
> Vyatta is what I'm using.
>
> Cheers,
> Jason
>
> On Wed, 9 Nov 2016 at 16:39 Mark Newton <newton at atdot.dotat.org> wrote:
>
>> You haven’t said what provider-edge platform you’re using.
>>
>> If you’re considering netflow, ntop, or nagios, you’re probably coming at
>> the problem from the wrong direction.
>>
>>   - mark
>>
>>
>> > On Nov 9, 2016, at 2:50 PM, Jason Firmino <jason.firmino at gmail.com>
>> wrote:
>> >
>> > Hello,
>> >
>> > Can any of you gentleman/women share some light on a network analyser
>> for billing purposes?
>> >
>> > I was looking at things like netflow = Too expensive.
>> > NtopNG = Looked like I may have some load issues.
>> >
>> > Basically I need to start billing traffic to a couple of customers
>> based on IP address and I want something reliable. Also something cheap or
>> free would be sweet :D
>> >
>> > If you have something you use or recommend, any ideas will be much
>> appreciated.
>> >
>> > Thanks,
>> > Jason Firmino
>> >
>> > _______________________________________________
>> > AusNOG mailing list
>> > AusNOG at lists.ausnog.net
>> > http://lists.ausnog.net/mailman/listinfo/ausnog
>>
>>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>


-- 

Damien Gardner Jnr
VK2TDG. Dip EE. GradIEAust
rendrag at rendrag.net -  http://www.rendrag.net/
--
We rode on the winds of the rising storm,
 We ran to the sounds of thunder.
We danced among the lightning bolts,
 and tore the world asunder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20161109/19e255ca/attachment.html>