[AusNOG] Network analyser

Mark Newton newton at atdot.dotat.org
Wed Nov 9 17:29:29 EST 2016


Well, there go all my suggestions :-)

  - mark


> On Nov 9, 2016, at 5:02 PM, Jason Firmino <jason.firmino at gmail.com> wrote:
> 
> Hey Mark,
> 
> Vyatta is what I'm using.
> 
> Cheers,
> Jason
> 
> On Wed, 9 Nov 2016 at 16:39 Mark Newton <newton at atdot.dotat.org <mailto:newton at atdot.dotat.org>> wrote:
> You haven’t said what provider-edge platform you’re using.
> 
> If you’re considering netflow, ntop, or nagios, you’re probably coming at the problem from the wrong direction.
> 
>   - mark
> 
> 
> > On Nov 9, 2016, at 2:50 PM, Jason Firmino <jason.firmino at gmail.com <mailto:jason.firmino at gmail.com>> wrote:
> >
> > Hello,
> >
> > Can any of you gentleman/women share some light on a network analyser for billing purposes?
> >
> > I was looking at things like netflow = Too expensive.
> > NtopNG = Looked like I may have some load issues.
> >
> > Basically I need to start billing traffic to a couple of customers based on IP address and I want something reliable. Also something cheap or free would be sweet :D
> >
> > If you have something you use or recommend, any ideas will be much appreciated.
> >
> > Thanks,
> > Jason Firmino
> >
> > _______________________________________________
> > AusNOG mailing list
> > AusNOG at lists.ausnog.net <mailto:AusNOG at lists.ausnog.net>
> > http://lists.ausnog.net/mailman/listinfo/ausnog <http://lists.ausnog.net/mailman/listinfo/ausnog>
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20161109/0259572d/attachment.html>


More information about the AusNOG mailing list