[AusNOG] Cisco BRI Acting as Provider

[David Beveridge]

see
https://www.telephonyware.com/audiocodes-mediant-1000-8-bri-ports-sip-m1k-d8.html


On Mon, Aug 31, 2015 at 9:51 PM, Andrew Barbara <andrew at focusnet.com.au>
wrote:

> Cheers Ben,
>
>
>
> They seem to have a lot of T1 / Analogue, but I cant see much in the way
> of BRI – unless im missing something?
>
>
>
> Cheers
>
>
>
> Andrew
>
>
>
> *From:* Ben Matthews [mailto:bmatthews at lostinip.com]
> *Sent:* Monday, 31 August 2015 5:49 PM
> *To:* Andrew Barbara
> *Subject:* Re: [AusNOG] Cisco BRI Acting as Provider
>
>
>
> Hi
>
>
>
> Take a look at adtran
>
> http://www.adtran.com.au/web/page/portal/Adtran/product/1200740E1/114
>
>
>
> Thx
>
> Ben
>
> Sent from my iPhone
>
>
> On 31 Aug 2015, at 18:55, Andrew Barbara <andrew at focusnet.com.au> wrote:
>
> Hi All,
>
>
>
> Sorry for the noise…
>
>
>
> Looking to configure a Cisco router (say 2811 with VIC-2BRI-NT/TE) as a
> SIP to BRI gateway (To an existing Panasonic PBX)
>
>
>
> The customer already has the router so would be good to re-use if possible.
>
>
>
> Done this a few times with PRI / E1 but getting some strange things with
> the BRIs.
>
>
>
> Anyone done this before, or know of an alternative device that has 8 BRI
> ports and can handle all 16 open channels?
>
>
>
> Cheers
>
>
>
> Andrew
>
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20150901/aaecb14d/attachment.html>