[AusNOG] Internode IPv6 Support

[Karl Auer]

On Tue, 2015-10-20 at 11:16 +1100, Mark Newton wrote:
> On Oct 19, 2015, at 3:01 PM, Karl Auer <kauer at biplane.com.au> wrote:
> > I don't get a prefix on the outside interface. There is no technical
> > need for one, either
> The point was to make sure that a user with a single PC plugged into
> the ethernet jack on their bridged-mode CPE would have a working
> internet service.

But I don't get one. Waah! Why don't I get one?

My theory: The MikroTik only has a DHCPv6-PD client configured on the
outside interface, not a DHCPv6 client. So it can pick up a prefix OK,
but won't get a GUA. Router interfaces don't do SLAAC, so it won't get a
GUA that way either - but a singleton PC on a bridge-mode CPE *would* do
DHCPv6 and/or SLAAC, so would get an address.

I must try plugging a box directly into my bridge-mode CPE to see what
happens.

Regards, K.


-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Karl Auer (kauer at biplane.com.au)
http://www.biplane.com.au/kauer
http://twitter.com/kauer389

GPG fingerprint: 3C41 82BE A9E7 99A1 B931 5AE7 7638 0147 2C3C 2AC4
Old fingerprint: EC67 61E2 C2F6 EB55 884B E129 072B 0AF0 72AA 9882