[AusNOG] Procurve POE Switch RTP issues

[Cameron Murray]

http://support.shoretel.com/kb/view.php?id=kA1C0000000LC7YKAW Was my lead
towards the switch.

On Thu, Apr 16, 2015 at 7:36 PM, Cameron Murray <cameron.murray at gmail.com>
wrote:

> Ben,
>
> The same RTP ports for both.
>
> Also tried, UDP, TCP & TLS
>
> Cheers
>
> Cameron
>
> On Thu, Apr 16, 2015 at 7:34 PM, Ben Hohnke <settra+ausnog at gmail.com>
> wrote:
>
>> Are the phones and soft phones  using the same rtp ports? It definitely
>> sounds more like a NAT/firewall issue more than a switching issue.
>>
>> Ben
>>
>> On Thu, 16 Apr 2015 19:29 Cameron Murray <cameron.murray at gmail.com>
>> wrote:
>>
>>> Guys,
>>>
>>> Sorry for the slightly off topic post but I'm stumped and 1000km from
>>> the problem.
>>>
>>> We provisioned some Snom phones this afternoon for a customer however
>>> SIP sessions establish and calls can be signalled however the audio/rtp
>>> stream is silent in both directions.
>>>
>>> We tested a softphone which worked correctly from inside their network.
>>>
>>> We have concluded that the HP Procurve 2610-48 pw may be interfering
>>> with the flow however this device is blind to us and we have no access nor
>>> the customer documentation.
>>>
>>> Has anyone seen similar issues with these devices?
>>>
>>> Regards
>>>
>>> Cameron
>>> _______________________________________________
>>> AusNOG mailing list
>>> AusNOG at lists.ausnog.net
>>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20150416/2bbabfc4/attachment.html>