[AusNOG] Bgp capable router for aws direct connect

[Cameron Daniel]

On 2014-10-07 6:50 pm, Matthew VK3EVL wrote:
> Keeping it simple. One side, aws, will only feed routes via bgp. It
> will have 50 or so private ip /21s
> Default route on the other interface going to the core that is more
> than capable of gigabit but not licensed for bgp. Any filtering will
> be done there or on a firewall.

Be aware that if those 50 or so prefixes will be from 50 or so VPCs then 
I think you'll need that many BGP sessions as well. This might also be a 
limit if you're looking at a switch to handle the routing.

If it's a public virtual interface for non-EC2 AWS services then 
disregard

Cheers
Cameron