[AusNOG] Vyatta IPv6 Ping Responses

[Damien Gardner Jnr]

Have you configured that V6 interface since the last reboot?  if so, try
rebooting, I've found vyatta to have inherited Debian's extreme crappines
at configuring V6 - usually you need to manually configure the interface,
or just give it a reboot..
BTW, I can ping ::1, but not ::1 from this end..

On 25 November 2014 at 14:29, <daniel at glovine.com.au> wrote:

> Gday Guys
>
>
>
> Just wondering if anybody on-list has ever seen the issue I will describe
> below,
>
>
>
> We have setup our interface with 2400:d400:ffff:5332:4::1/126
>
>
>
> We try and ping our gateway of 2400:d400:ffff:5332:4::
>
>
>
> However when we ping the gateway we get a response from
> 2400:d400:ffff:5332:4::1 with a valid pong ms response
>
>
>
> If anybody knows how I can resolve this, would be highly appreciated
>
>
>
>
>
> Daniel
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>


-- 

Damien Gardner Jnr
VK2TDG. Dip EE. GradIEAust
rendrag at rendrag.net -  http://www.rendrag.net/
--
We rode on the winds of the rising storm,
 We ran to the sounds of thunder.
We danced among the lightning bolts,
 and tore the world asunder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20141125/85a3d4bc/attachment.html>