[AusNOG] Vyatta Licensing Costs

[Kristoffer Sheather @ CloudCentral]

Hi Alex,
  
 The Vyatta Community edition certainly works well for our cases.  We've never needed support and 6.6 R1 has been a robust product since we've had it within our network.
  
 I believe the open-source community fork VyOS is starting to get some traction, you can also look at the other commercial fork Ubiquity.
  
  Regards,

Kristoffer Sheather
CloudCentral
  
 Phone: 1300 144 007 | Mobile: +61 414 573 130 | Email: kris at cloudcentral.com.au
LinkedIn:   | Skype: kristoffer.sheather | Twitter: http://twitter.com/kristofferjon
   

  

----------------------------------------
 From: "Alex Samad - Yieldbroker" <Alex.Samad at yieldbroker.com>
Sent: Friday, May 23, 2014 9:32 AM
To: "kris at cloudcentral.com.au" <kris at cloudcentral.com.au>, "Peter Betyounan" <peter at serversaustralia.com.au>
Cc: "ausnog at lists.ausnog.net" <ausnog at lists.ausnog.net>
Subject: RE: [AusNOG] Vyatta Licensing Costs   

I got a quote for their VM router.. Very expensive for what it was.  

   

Charging on a per cpu of the host..  So 32 cpu  host and 2 cpu vm . means its rather expensive. (from memory)  

   

I went back to routeros, until the vyatta fork takes off.  

   

A  

      

From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Kristoffer Sheather @ CloudCentral
Sent: Friday, 23 May 2014 7:47 AM
To: Peter Betyounan
Cc: ausnog at lists.ausnog.net
Subject: Re: [AusNOG] Vyatta Licensing Costs 

    

Yes - thats definitely their objective, though I could think of better ways of going about it in order to achieve the desired outcome. 

  

----------------------------------------

From: "Peter Betyounan" <peter at serversaustralia.com.au>
Sent: Friday, May 23, 2014 7:45 AM
To: kris at cloudcentral.com.au
Cc: "Nathan Brookfield" <Nathan.Brookfield at simtronic.com.au>, "Daniel Watson" <Daniel at glovine.com.au>, "ausnog at lists.ausnog.net" <ausnog at lists.ausnog.net>
Subject: Re: [AusNOG] Vyatta Licensing Costs    

  

I guess to ensure their vRouter 5600 gets better uptake?    

  

We found brocade to give the worst training support in Australia, as if they did not care about certification paths in Australia. I believe we have tried via a few channels only to be told it is not available for months on end. Anyone from Brocade on this list care to comment?     

      
 	 		 			 	  		

     

On Fri, May 23, 2014 at 7:36 AM, Kristoffer Sheather @ CloudCentral <kristoffer.sheather at cloudcentral.com.au> wrote:    

Previously when we purchased VSE we were able to see the pricing in the online store.  Since the 'takeover' by Brocade this is no longer the case.  They have also trashed the Vyatta Community (VC) edition and thumbed their noses at the community itself.  Certainly deserving of a punch in the nose! 

  

Regards,

Kristoffer Sheather
CloudCentral 

  

Phone: 1300 144 007 | Mobile:  +61 414 573 130 | Email: kris at cloudcentral.com.au
LinkedIn:   | Skype: kristoffer.sheather | Twitter: http://twitter.com/kristofferjon 

  

  

----------------------------------------

From: "Nathan Brookfield" <Nathan.Brookfield at simtronic.com.au>
Sent: Friday, May 23, 2014 6:34 AM
To: "Daniel Watson" <Daniel at glovine.com.au>
Cc: "ausnog at lists.ausnog.net" <ausnog at lists.ausnog.net>
Subject: Re: [AusNOG] Vyatta Licensing Costs      

  

Hi Daniel, 

  

The sales team over in Vyatta land are very helpful and I am not sure about how but in the past this pricing was available through there online shop on the website where you can purchase Support and licensing.
     

Kindest Regards, 

Nathan Brookfield    

     

Chief Executive Officer 

Simtronic Technologies Pty Ltd 

  

Web: http://simtronic.com.au 

Phone: 1300 592 330 

Fax: (02) 4749 4950 

On 22 May 2014, at 21:39, "Daniel Watson" <Daniel at glovine.com.au> wrote:
  

Gday Guys  

   

Just wondering if anybody could ping me off-list with pricing they are aware of, for vyatta paid versions?  

   

I know about the free version, just interested to see the price on the paid version,   Already have a contact request in with Brocade  

   

   

Daniel 

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog 

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog
  


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140523/8d76c0c2/attachment-0001.html>