[AusNOG] Radiator vs FreeRADIUS

[Radek Tkaczyk]

Thanks guys, that gives me a fair bit to work with.

Regards,

Radek
Ph: 0413 383 231
radek at tkaczyk.id.au


-----Original Message-----
From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Luke Iggleden
Sent: Monday, 19 May 2014 11:24 AM
To: ausnog at lists.ausnog.net >> "ausnog at lists.ausnog.net"
Subject: Re: [AusNOG] Radiator vs FreeRADIUS

Hi Peter,

My first line was my disclaimer, the last time we used an open source radius was cistron radius, which from the existing website now recommends freeRadius. If we were successful with Radiator, why would we spend time to go and review another RADIUS?

I know nothing about the current version of FreeRadius and I never suggested that I did. I was merely giving a +1 for Open's Radiator as we have used it for 8+ years supporting 10's of thousands of users.

In particular we had a requirement to do lots of re-writing of radius packets using handlers & hooks which no other product had the ability to do those years ago which can easily be done right out of the radiator config.



On 19/05/2014 11:10 am, Peter Tonoli wrote:
> Hi Luke,
>
> ----- Original Message -----
>> From: "Luke Iggleden" <luke+ausnog at sisgroup.com.au>
>> To: ausnog at lists.ausnog.net
>> Sent: Monday, 19 May, 2014 9:37:39 AM
>> Subject: Re: [AusNOG] Radiator vs FreeRADIUS Hi Radek,
>>
>> Been a long time since we have looked at FreeRADIUS.
>>
>> Radiator is rock solid, scales well, and is extremely flexible. Over 
>> many years of running an ISP that was the glue that held everything 
>> together for us.
>
> Not trying to start a war here. We've found FreeRADIUS to be rock solid, and extremely flexible. I'm just wondering what Radiator can do that FreeRADIUS can't (apart from the web GUI), and vice-versa?
>
> Cheers,
> Peter.
>

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog