[AusNOG] Switch PDU for remote sites

[James Braunegg]

Have a look at  http://www.csspl.com.au/intelligent-power-rails.html

Computer Support Systems P/L
373 Johnston Street
Abbotsford, Victoria, Australia, 3067
Phone +61 3 9419 3955    Fax + 61 3 9419 3509

Speak to Rob Hallas,

Kindest Regard

James Braunegg
P:  1300 769 972  |  M:  0488 997 207 |  D:  (03) 9751 7616
E:   james.braunegg at micron21.com<mailto:james.braunegg at micron21.com>  |  ABN:  12 109 977 666
W:  www.micron21.com/ddos-protection<http://www.micron21.com/ddos-protection>   T: @micron21


[Description: Description: Description: Description: M21.jpg]
This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer.

From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Mark Foster
Sent: Tuesday, July 01, 2014 3:08 PM
To: ausnog at lists.ausnog.net
Subject: Re: [AusNOG] Switch PDU for remote sites

Yes, not long ago something similar came up.

I recommended the Dynamix RPSW10A8 which is 1RU, 8x IEC C13 Outlets, switched, web-managable (unsure about a CLI option!) metered and so-on.
There is also a 16A version.
In NZ you can get these from Computer Dynamics (cdlnz.com)
If you search the archive someone posted an AU based suppleir for these too IIRC.

APC have one (and I know it has both serial and telnet support in addition to web); the 16A vendor part number (VPN) is AP7821.
APC in NZ are distributed by Westcon Group or Ingram Micro.

Cheers
Mark.

PS: Had a bad experience with an Eaton branded managed PDU recently - not particularly keen on them.

On 1/07/2014 5:03 p.m., Tony wrote:
I think this has come up on the list before (check archives). You could try WTI ones:

http://www.wti.com/p-238-nps-8h20-ats-2-network-power-switch-pdu-ats-20a-208v-8iec-c13.aspx


regards,
Tony.


________________________________
From: Tristram Cheer <tristram.cheer at ubergroup.co.nz><mailto:tristram.cheer at ubergroup.co.nz>
To: "ausnog at lists.ausnog.net"<mailto:ausnog at lists.ausnog.net> <ausnog at lists.ausnog.net><mailto:ausnog at lists.ausnog.net>
Sent: Tuesday, 1 July 2014 1:59 PM
Subject: [AusNOG] Switch PDU for remote sites

Hi All,

I'm looking around for a 1 RU switch PDU with good telnet/ssh services that doesn't cost the earth. We've been trailing the Aten PN9108 but it's Telnet daemon is iffy and descriptions for the ports aren't displayed in terminal. I've looked at the Eaton IPC 3601 but it's price tag is a tad high at $1400+ NZD,

I was wondering if anyone here had any recommendations for a 1 RU unit, 6 ports + , RS232 (not usb) and Ethernet, Simple and solid telnet/ssh. It would be sitting in very remote sites with a OOB uplink so stability is key, Ideally under $1k


Cheers :)
--
Tristram Cheer




_______________________________________________

AusNOG mailing list

AusNOG at lists.ausnog.net<mailto:AusNOG at lists.ausnog.net>

http://lists.ausnog.net/mailman/listinfo/ausnog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140701/32bbb708/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2683 bytes
Desc: image001.jpg
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140701/32bbb708/attachment.jpg>