[AusNOG] IPv6 on WiFi

[Karl Auer]

On Fri, 2013-06-28 at 11:41 +0500, Imtiaz Ahmad wrote:
> Is there any idea about best practices for IPv6 support on WiFi at customer
> end?

>From my blog ( http://biplane.com.au/blog/?p=194 ):

   [...] at this period of history the best advice, really, is
   to get out there and do your best. Read articles like this
   one, then make your own considered judgements. Hopefully
   you will do well, and your network will become a shining
   beacon of wonderfulness. But it is just as useful if, a
   few years from now, people point at the smoking wreckage
   of your network and murmur in hushed tones to their
   junior network techs “don’t do that”. Of course, it’s
   not so useful to *you*.

That said, there are quite a few developing best practices, particularly
in the area of address schemas (the blog entry above has some ideas).

As to the rest, well - could you be a teensy bit more specific?

Regards, K.

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Karl Auer                                          tel  +61-2-64957435
kauer at into6.com.au                                 mob  +61-428-957160
                                         
Into6 - IPv6 design, support, training                www.into6.com.au

GPG/PGP fingerprint: D8A4 A65A EE32 286F 1E36 55A4 0901 EEAF A785 1684