[AusNOG] CPE recommendation

[Mitch Kelly]

Graeme,

None of those boards have Voice/FXO/FXS Ports


On Sat, Jul 27, 2013 at 4:00 PM, Guy Ellis <guy at traverse.com.au> wrote:

> Hi Graeme,
>
> If you are linux savy you could run OpenWRT on one of these boards...
>
> http://www.pcengines.ch/**alix2d13.htm<http://www.pcengines.ch/alix2d13.htm>
> or
> http://soekris.com/products/**net5501/net5501-60-board.html<http://soekris.com/products/net5501/net5501-60-board.html>
>
> Regards,
>  - Guy
>
>
> On 27/07/2013 2:45 PM, Graeme Allen wrote:
>
>> Hi All,
>>
>> This seems simple, but I am having a very hard time finding something
>> suitable.
>>
>> The basics:
>>   - Ethernet WAN port
>>   - 4 LAN ports
>>   - WiFi would be good
>>   - 2x FXS would be good
>>
>> The hard bits:
>>   - On the WAN port, run PPPoE on the native VLAN (untagged) <= not hard
>>   - On VLAN xxx run VoIP for the FXS ports <= bind the UA function to
>> this interface
>>   - On VLAN yyy there will be multicast, the router to snoop on the LAN
>> and join on this VLAN
>>   - Support static routes into the various interfaces
>>   - Residential pricing <= HARD
>>
>> I did fond one device that does what I need, it's a Thompson unit, but I
>> can only buy it in lots of 10,000, with a massive lead time.
>>
>> Appreciate and ideas...Cheers...Graeme.
>>
>>
>> ______________________________**_________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/**mailman/listinfo/ausnog<http://lists.ausnog.net/mailman/listinfo/ausnog>
>>
>>
>
> --
> Guy Ellis
> guy at traverse.com.au
> www.traverse.com.au
> T: +61 3 9386 4435 M: +61 419 398 234
>
>
> ______________________________**_________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/**mailman/listinfo/ausnog<http://lists.ausnog.net/mailman/listinfo/ausnog>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130727/440e3e52/attachment.html>