[AusNOG] CPE recommendation

[Guy Ellis]

Hi Graeme,

If you are linux savy you could run OpenWRT on one of these boards...

http://www.pcengines.ch/alix2d13.htm
or
http://soekris.com/products/net5501/net5501-60-board.html

Regards,
  - Guy

On 27/07/2013 2:45 PM, Graeme Allen wrote:
> Hi All,
>
> This seems simple, but I am having a very hard time finding something
> suitable.
>
> The basics:
>   - Ethernet WAN port
>   - 4 LAN ports
>   - WiFi would be good
>   - 2x FXS would be good
>
> The hard bits:
>   - On the WAN port, run PPPoE on the native VLAN (untagged) <= not hard
>   - On VLAN xxx run VoIP for the FXS ports <= bind the UA function to this interface
>   - On VLAN yyy there will be multicast, the router to snoop on the LAN and join on this VLAN
>   - Support static routes into the various interfaces
>   - Residential pricing <= HARD
>
> I did fond one device that does what I need, it's a Thompson unit, but I
> can only buy it in lots of 10,000, with a massive lead time.
>
> Appreciate and ideas...Cheers...Graeme.
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>


-- 
Guy Ellis
guy at traverse.com.au
www.traverse.com.au
T: +61 3 9386 4435 M: +61 419 398 234