[AusNOG] Telstra South Brisbane Fibre with Cisco 887W

[Travis]

You can actually put the PPPoE client on the vlan interface ie:


conf t
int vlan 1
pppoe-client dial-pool-number 1

It comes up with warning saying its not recommended because I think you
can't then do qos on the dialler but it does work.

I only mention it because I have had trouble putting the pppoe-client
directly on the fastethernet interfaces of my Cisco 877 in the past.


On 7 January 2013 12:29, Tom Berryman <tom at connectivityit.com.au> wrote:

>  Success on an 877 will be limited, as long as it can do 2 VLAN you will
> be ok – it just depends on your IOS level, IPBase I believe will only allow
> 1 VLAN.****
>
> ** **
>
> *Tom Berryman*
>
> I.T. Systems Engineer****
>
> ** **
>
> *Connectivity IT // *Director*  *
>
> ** **
>
> Phone: 03 5622 4600****
>
> Email: tom at connectivityit.com.au****
>
> www.connectivityit.com.au
> facebook.com/connectivityit <http://www.facebook.com/connectivityit> ** **
>
> ** **
>
> [image: Description: Description: Description: Description:
> cid:image001.png at 01CC2C24.0AB65CB0]****
>
> ** **
>
> *From:* ausnog-bounces at lists.ausnog.net [mailto:
> ausnog-bounces at lists.ausnog.net] *On Behalf Of *Skeeve Stevens
> *Sent:* Monday, 7 January 2013 12:39 PM
> *To:* <ausnog at lists.ausnog.net>
> *Subject:* [AusNOG] Telstra South Brisbane Fibre with Cisco 887W****
>
> ** **
>
> Hey all,****
>
> ** **
>
> We have a customer who cutover to the Telstra fibre service (Velocity?) on
> the South Brisbane Exchange in Southbank.****
>
> ** **
>
> They were temporarily put them on a Cisco SRP527W (or whatever the junk
> was) by Telstra... and it is working ok, ****
>
> ** **
>
> We need to upgrade it back to a Cisco 887W and I was wondering if anyone
> has a config for the 877W which is working on the Telstra Fibre service.**
> **
>
> ** **
>
> I am assuming it will use PPPoE or something on one of the ethernet
> interfaces (instead of the DSL).  I assume an ethernet interface with a
> VLAN will be able to be used for this, but I have no idea how the Telstra
> service works.****
>
> ** **
>
> I'd go to site and figure it out, but its in Brisbane, and I have to
> prepare the config before sending it to the local tech.****
>
> ** **
>
> Thanks for any help someone can provide.****
>
> ** **
>
> ...Skeeve
> ****
>
> ** **
>
> *Skeeve Stevens, CEO - *eintellego Pty Ltd****
>
> skeeve at eintellego.net ; www.eintellego.net****
>
> Phone: 1300 753 383; Cell +61 (0)414 753 383 ; skype://skeeve****
>
> facebook.com/eintellego ; linkedin.com/in/skeeve ****
>
> twitter.com/networkceoau ; blog: www.network-ceo.net****
>
> ****
>
> The Experts Who The Experts Call****
>
> Juniper - Cisco – IBM - Brocade - Cloud****
>
> -----****
>
> Check out our Juniper promotion website!  eintellego.mx****
>
> Free Apple products during this promotion!!! ****
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130107/9fc8ea83/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 2340 bytes
Desc: not available
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130107/9fc8ea83/attachment.png>