[AusNOG] Telstra South Brisbane Fibre with Cisco 887W
Nick Slager
lists at zith.net
Mon Jan 7 12:53:48 EST 2013
Yes, its just PPPoE. You'll need a routed Ethernet interface. From an 1801 I have off South Brisbane:
interface FastEthernet0
pppoe enable
pppoe-client dial-pool-number 1
!
interface Dialer0
ip address negotiated
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp chap refuse
ppp pap sent-username username at realm password 0 blah
!
I was told CHAP wasn't supported, hence the configuration above. CHAP did however appear to work, although our testing was limited.
Nick
On 07/01/2013, at 11:38 AM, Skeeve Stevens <skeeve+ausnog at eintellego.net> wrote:
> Hey all,
>
> We have a customer who cutover to the Telstra fibre service (Velocity?) on the South Brisbane Exchange in Southbank.
>
> They were temporarily put them on a Cisco SRP527W (or whatever the junk was) by Telstra... and it is working ok,
>
> We need to upgrade it back to a Cisco 887W and I was wondering if anyone has a config for the 877W which is working on the Telstra Fibre service.
>
> I am assuming it will use PPPoE or something on one of the ethernet interfaces (instead of the DSL). I assume an ethernet interface with a VLAN will be able to be used for this, but I have no idea how the Telstra service works.
>
> I'd go to site and figure it out, but its in Brisbane, and I have to prepare the config before sending it to the local tech.
>
> Thanks for any help someone can provide.
>
> ...Skeeve
>
>
> Skeeve Stevens, CEO - eintellego Pty Ltd
> skeeve at eintellego.net ; www.eintellego.net
> Phone: 1300 753 383; Cell +61 (0)414 753 383 ; skype://skeeve
> facebook.com/eintellego ; linkedin.com/in/skeeve
> twitter.com/networkceoau ; blog: www.network-ceo.net
>
> The Experts Who The Experts Call
> Juniper - Cisco – IBM - Brocade - Cloud
> -----
> Check out our Juniper promotion website! eintellego.mx
> Free Apple products during this promotion!!!
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
More information about the AusNOG
mailing list