[AusNOG] getting dhcp working on an srx110

[Ben Dale]

Hi Peter,

Should be pretty good out of the box - just make sure you're not plugged into ge-0/0/0, as by default this is set as an untrust interface with no configuration

Cheers,

Ben

On 21/09/2012, at 2:54 PM, Peter Brown <rendhalver at gmail.com> wrote:

> Hi lads and lasses
> 
> I am really new to Juniper and serious (as in non web-gui) network
> administration and I am attempting to setup my new SRX110 for DHCP.
> It's got a pretty much default setup (I was getting nowhere so I
> restored factory defaults and resetup my adsl connection and passwords
> but that's it so far)
> The only access I have right now is console access via screen (yeah
> it's probably not the best but it worked so I stuck with it) so
> sending my config may be tricky unless someone knows how to do that
> over a console port.
> It has the default dhcp pool setup but I can't get it to work.
> I am likely missing something really obvious.
> 
> Thanks in advance.
> Pete.
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>