[AusNOG] Getting some short MMF runs

[Bevan Slattery]

My suggestion is to seriously consider SMF.

[b]

-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Graeme Allen
Sent: Thursday, 1 March 2012 7:18 PM
To: ausnog at ausnog.net
Subject: [AusNOG] Getting some short MMF runs

Hi All,

I'm looking to get some fibre run between some inner metro buildings, basically MDF#1 == Footpath for about 70 meters == MDF#2. No road crossings.

Any recommendations for folks who are willing to do these small jobs (Melb and Syd), and the hard question, what "should" something like that cost?

Cheers,
Graeme.


_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog


The information contained in this email and any attachments may be confidential. This email and any attachments are also subject to copyright. No part of them may be reproduced, adapted or transmitted without the written permission of the copyright owner. If you are not the intended recipient, any use, interference with, disclosure or copying of this information is unauthorised and prohibited. If you have received this email in error, please immediately advise the sender by return email and delete the message from your system. All email communications to and from NEXTDC Limited are recorded for the purposes of archival and storage.