[AusNOG] TX/RX Conventions

[Jason Leschnik]

Not sure about new installations, but to identify current
installations i use my trusty iPhone camera :D

On Wed, Jun 13, 2012 at 8:21 AM, Tom Sykes <TomSykes at nbnco.com.au> wrote:
> Hi,
>
> I'm interested to understand which conventions/standards (if any) are being used by operators to identify the TX/RX in fibre patching panels/trays - in environments like a meet me room or datacentre.
>
> For example, if someone is allocated ports 3&4 some operators seem to use the "low" port as the TX, while others use the low port as the RX. Also interested to understand whether the convention specifies whether the TX/RX is egress from the port or is specifying the signal into the port.
>
> Thanks.
> Tom
>
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog



-- 
Regards,
Jason Leschnik.

[m] 0432 35 4224
[w@] jason dot leschnik <at> ansto dot gov dot au
[U@] jml974 at uow.edu.au
-------------- next part --------------
A non-text attachment was scrubbed...
Name: photo.JPG
Type: image/jpeg
Size: 140136 bytes
Desc: not available
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120613/88d437d6/attachment.jpe>