[AusNOG] Preparing 100s of routers for resale

[hannah commodore]

> On 12/04/2012, at 20:10, Ashley Lowde <ashley.lowde at gmail.com> wrote:
> 
>> Are they all using the same (or only a couple of different) images? If so I'd suggest
>> replacing all the compact flash cards, then booting each one and grabbing the appropriate
>> image from a tftp server. You can then reboot it and clear the config using password
>> recovery mode if necessary.
> 
> I don't have access to these devices yet, but from previous experience it would likely be a single basic 12.4 image with just vlan/port/trunk port/snmp configs
> 
> On 12/04/2012, at 20:09, Jason Leschnik <leschnik at gmail.com> wrote:
> 
>> Do they have SSH?
>> Do they have a similar auth config user/password?
> 
> does the ssh info get stored elsewhere?
> 
> 
> Thanks all for the suggestions. Seems automating a serial console session will be the best option for this task. I'll just script a Linux netbook so I can churn through them. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120412/632fdc7d/attachment.html>