[AusNOG] Connectivity issues with 1.0.0.0/8 address space

[Mark Andrews]

In message <AANLkTimPC65wjUxw=EnOC8_UyA1wbAtnWJamVE6N1yt7 at mail.gmail.com>, Adam
 Griffiths writes:
> Hi AusNoggers,
> 
> Telstra's recently been assigned and begun to use portions of the
> 1.0.0.0/8 address ranges from APNIC.  Although this was allocated to
> APNIC close to a year ago, we've recently encountered some issues with
> corporates (both Telstra and non Telstra) and ISP's filtering these
> ranges both locally and overseas.
> 
> Given these issues with the 1.0.0.0/8 ranges and also the recently
> allocated 5, 23,  37, 100, 105 /8's it may be worth checking filters.
> 
> I doubt anybody on AusNOG hasn't updated their bogon filters (as we're
> all great network operators) but worth a try as one less user
> downstream with an issue is one less destination to worry about.

Given there are almost no more /8's to be allocated, one might as
well go to the end state now.  Adjust for local usage.

        0/8
        10/8            (rfc 1918)
        127/8
        172.16/12       (rfc 1918)
        192.168/16      (rfc 1918)
        224/4           (multicast)
        240/4           (experimental)

Mark

> Best Regards,
> 
> Adam Griffiths
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
-- 
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742                 INTERNET: marka at isc.org