[AusNOG] DSLAM Dropout issues

[Stavros Patiniotis]

Hi Mark,
 
> Recently added a bras? Try the latest firmware with the nb6plus4w.
> There was a fault with them where once you had a certain number of brases,
PPP on the modem wouldn't come back up after an ADSL drop > out. 

I removed the MT and replaced it with the cisco. There is only one BRAS. The
NB6Plus4W Rev2 is running the latest firmware 4.24p.  We too have seen this
problem (with the nb6p4w), in which it will lose PPP and not reconnect until
a power cycle. I have reported this to netcomm.

Stavros