[AusNOG] 4Byte AS quagga configuration

[Tim Warnock]

Does it support in the form of 'router bgp 2.157'

> -----Original Message-----
> From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-
> bounces at lists.ausnog.net] On Behalf Of Karl Kloppenborg
> Sent: Saturday, 27 March 2010 12:11 PM
> To: ausnog at ausnog.net
> Subject: [AusNOG] 4Byte AS quagga configuration
> 
> Howdy Noggers,
> 
> We have recently acquired our 4byte AS number and am having large
> amounts of trouble with setting it up in Quagga.
> 
> Currently our AS is 2Byte and have had no issue with it however
> changing one of our routers BGP configs from "router bgp 2byteAS" to
> "router bgp 131229" leaves me with this error:
> 
> -----------------------------------------------------------------------
> -----------------------
> [$$$$]# service bgpd restart
> Shutting down bgpd:                                        [  OK  ]
> Starting bgpd: There is no such command.
> Error occured during reading below line.
> router bgp 131229
> 
>                                                            [FAILED]
> 
> -----------------------------------------------------------------------
> ------------------------
> 
> 
> This problem is caused only when I switch to 4byte and if I do a bgpd
> version check it is:
> [$$$$$$$]# bgpd -v
> bgpd version 0.99.16
> Copyright 1996-2005 Kunihiro Ishiguro, et al.
> 
> and from everything I have googled it should support AS4 numbering?
> 
> If anyone has some examples or thoughts on the matter I would be most
> happy to hear from you! :)
> 
> 
> 
> Cheers!
> Karl Kloppenborg
> Technical Director @ Karltec
> 
> 
> 
> 
> 
> 
> 
> 
> 
> P 02 8014 4253  EXT:104  | M 0438475892  |  www.karltec.net
> 
> Please consider the environment before printing this email. Think
> before you print.
> 
> 
> 
> 
>