[AusNOG] 3G wireless signal Strength testing.

[Curtis Bayne]

Simon,

Apart from the usual hubub regarding the use of spectrum analyzers to identify noise on the appropriately licenced bands, nothing springs to mind. 

Re latency, I see 100ms from 3, 120ms from Optus and 26ms from NextG from datacards to my datacentre, whilst sitting inside it.

nextG has voodoo. Not sure what it is but more of that please Telstra.

Curtis

Sent from my HTC Touch Pro

-----Original Message-----
From: Thomason, Simon <Simon.Thomason at racq.com.au>
Sent: Wednesday, 9 June 2010 5:01 PM
To: ausnog at lists.ausnog.net <ausnog at lists.ausnog.net>
Subject: [AusNOG] 3G wireless signal Strength testing.

Hey All,

Was wondering if anyone has had a bit of experience with testing of signal strength of different carriers' wireless 3G devices/services. Weather this be a piece of software or hardware that can provide a little more information that the standard fair from a USB dongle

Ideally I am interested in a piece of software that resides on a remote machine that can report back to a head end that can keep historical information and can be reported on.

Also was wondering if anyone could give an idea of there experience with latency over different networks in regards to 3G. A good comparison would be the difference that can be experience from a wired connected to a 3G in the same area to the same destination.

I know these are all pretty specific questions but I am certain a few people in ausnog land have run into this in some way, shape or form.


Simon Thomason

Join us at MotorFest on 11 July 2010 at Eagle Farm Racecourse. Visit www.racq.com/motorfest for more information

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.