[AusNOG] Juniper CX111 Failover for Cisco 870's

[Bruce Renner]

Is there anyone here that has used a Juniper CX111 3g Ethernet Bridge? Will
they work with a non juniper router?

http://www.juniper.net/techpubs/hardware/junos-cx/cx111/cx111-3g-bridge-spec/cx111-3g-bridge-spec.pdf

I would like to use it for 3g fail over for non juniper routers, (Cisco
870's). I can't find anywhere in there documentation that stats the device
will work with non juniper devices. Cisco are our router of choice for our
customers so we have hundreds of them already deployed. Or if anyone knows
of a device that can bridge a 3g connection so the IP from the 3g connection
will still terminate on the Cisco I would be very grateful for your
recommendations.

I know I can just get any 3g modem that supports NAT and setup a DMZ but I
was trying for a neater setup before resorting to that.

Cheers All,

-- 
*Bruce Renner
*Hosted Services


*Phone:* 07 3809 2999 |* Fax:* 07 3809 3999
*Address:* Unit 2 / 55 Tradelink Rd, Hillcrest, 4118
www.bettacomputers.com.au



Note: This message may contain privileged and confidential information that
is the property of the intended recipient. The information herein is
intended only for use of the addressee. If you are not the intended
recipient, then you are requested to return e-mail to Betta Computer
Services Pty Ltd and destroy any copies made. Copying or disseminating any
of this message is prohibited. Any views expressed in this message are those
of the individual sender and may not necessarily reflect the views of Betta
Computer Services Pty Ltd.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20101202/20dc4001/attachment.html>