[AusNOG] Lan extender recomendations

[Yin To Chu]

Or some latest high speed GE over powerline adaptors but not sure your two
power plugs that far are not isolated.---

On Wed, Sep 16, 2009 at 4:44 PM, Nick @ Deltaband <nick at deltaband.com>wrote:

> HI Shaun,
>
> Thanks, but sadly no line of site for this project...
>
> On Wed, Sep 16, 2009 at 4:36 PM, Shaun Dwyer <shaun at dwyer.id.au> wrote:
> > Hi Nick,
> >
> > If you can't find anything to work on your CAT3 cabling, you could look
> at
> > wireless technologies like 802.11N.
> >
> > 200m should be easy if you have LOS, especially if you can hang an
> > appropriate gain antenna off your radios at either end.
> >
> > Perhaps something like this? :
> > http://www.ubnt.com/products/bulletm.php
> >
> >
> >
> >
> > Cheers!
> > -Shaun
> >
> >
> > On 16/09/2009, at 1:32 PM, Nick @ Deltaband wrote:
> >
> >> Hi,
> >>
> >> Can anyone recommend a vendor that makes a *reliable* LAN extender
> >> product? Looking to extend a LAN over about 200m of CAT3 twisted pair,
> >> ideally at a speed of about 50mbps.
> >>
> >> TIA,
> >>
> >> Nick
> >> _______________________________________________
> >> AusNOG mailing list
> >> AusNOG at lists.ausnog.net
> >> http://lists.ausnog.net/mailman/listinfo/ausnog
> >
> >
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20090916/dcd60485/attachment.html>