[AusNOG] Full Internet routing table router recommendation

[Mitch Kelly]

Hi,

We use the Mik CCR2216 with a global table, Routing table is using about
1GB Ram out of 16Gb, Might still be out of the price range (5k), But it
sure does beat 50k for the 8500L with only a base license.

On Wed, Nov 22, 2023 at 8:58 AM Cameron Murray <cameron.murray at gmail.com>
wrote:

> Hi Nurul,
>
> What sort of throughput and port density are you looking for?
>
> Kind Regards
>
> Cameron
>
>
> On Wed, Nov 22, 2023 at 10:30 AM Nurul Islam <romislam at gmail.com> wrote:
>
>> Hi All,
>>
>> Good day. We are looking at an option to accept full Internet routing
>> table (approx 1Million Plus) from two ISP. Total route the edge router
>> probably needs to handle will be around 2 Million.
>>
>> What is the Cisco 1001-X equivalent from the current router range? Has
>> anyone used Cisco C8500L-8S4X with 16GB RAM (with performance licence) and
>> it handle this load on 2Mill internet routes?
>>
>> Regards
>>
>>
>> -N
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> https://lists.ausnog.net/mailman/listinfo/ausnog
>>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> https://lists.ausnog.net/mailman/listinfo/ausnog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ausnog.net/pipermail/ausnog/attachments/20231122/7a7015c6/attachment.htm>