[AusNOG] NBN FTTP router recommendations 200MBps+

[Matt Perkins]

Mikrotik RB4011iGS+


On 3/5/2022 11:21 am, Darren Moss wrote:
>
> Hi All,
>
> We have sites that are NBN FTTN (last mile VDSL2) which are being 
> upgraded to FTTP starting later this month.
>
> Currently we run Cisco 1900 series routers into firewalls, switches, 
> etc for small sites with 5-15 staff and that has worked well for many 
> years.
>
> Our smallest FTTP site will be 140 / 40MBps with larger sites 200MBps+ 
> hence I was thinking it’s time to upgrade / replace the 1900 units.
>
> Some of them are in support, however I’m not really bothered as we 
> have plenty of spares and this is a good opportunity to make 
> improvements whilst we’re doing site visits.
>
> A few sites have 4G / 5G backup via separate router which can remain 
> as is or integrated with new hardware if possible.
>
> We do have some Ubiquiti devices around which work well, happy to 
> consider those and any other suggestions.
>
> Happy to hear recommendations off or on list if the information can 
> benefit someone else here.
>
> Cheers
>
> Darren.
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at ausnog.net
> https://lists.ausnog.net/mailman/listinfo/ausnog

-- 
/* Matt Perkins
         Direct 02 8916 8101     Spectrum Networks Ptd. Ltd.
         Office 1300 133 299matt at spectrum.com.au
         ABN 66 090 112 913      Level 6, 350 George Street Sydney 2000
*/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ausnog.net/pipermail/ausnog/attachments/20220503/22bacfd5/attachment.htm>