[AusNOG] 10GBps router suggestions

[Simon Dixon]

look at an MX204 before an MX80, as they only have 2gig of ram and a very
very very very very slow RE CPU.  So not much good for multiple full tables
and very slow convergence time.  Which is fine in some cases.

Simon.


On Tue, 17 Nov 2020 at 16:48, DaZZa <dazzagibbs at gmail.com> wrote:

> How much do you want to spend?
>
> A Juniper MX 80 will easily do that, and carry up to 8 X 10 gig ports.
>
> An MX 40 only has 4 X 10 gig or I'd say use one of those.
>
> You could do it cheaper with an SRX1500 in packet mode, but the total
> throughout is lower than the 80gig the MX80 will push.
>
> D
>
> On Tue, 17 Nov 2020, 6:20 pm Darren Moss, <Darren.Moss at cloud365.com.au>
> wrote:
>
>> Hi Dave,
>>
>>
>>
>> Preferably able to move 10GBps around but we can do 10GBps ports for now
>> so long as we can spike for short periods.
>>
>>
>>
>> Typical traffic is well under, but we do move backups and replication
>> data usually overnight in AU so we could run less and still be fine.
>>
>>
>>
>> Cheers
>>
>>
>>
>>
>>
>> Darren.
>>
>>
>>
>> *From:* Dave Browning [mailto:dave at dlbnetworks.com]
>> *Sent:* Tuesday, 17 November 2020 6:15 PM
>> *To:* Darren Moss
>> *Cc:* AusNOG Mailing List
>> *Subject:* Re: [AusNOG] 10GBps router suggestions
>>
>>
>>
>> Do you just need 10Gbe holes, or be able to move 10Gbp/s around as well?
>>
>>
>>
>> On 17 Nov 2020, at 5:12 pm, Darren Moss <Darren.Moss at cloud365.com.au>
>> wrote:
>>
>> 
>>
>> Hi Noggers,
>>
>>
>>
>> I am looking to upgrade (replace) 3x  Cisco routers.
>>
>>
>>
>> My preference is Cisco, however open to considering others.
>>
>>
>>
>> Must have dual PSUs and support 10GBps interfaces.
>>
>>
>>
>> We have 3 public (fibre) and 2 private interfaces on each router.
>>
>>
>>
>> Happy to hear suggestions.
>>
>>
>>
>> Many thanks
>>
>>
>>
>>
>>
>> Darren.
>>
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>


-- 

Dicko.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20201117/e4536924/attachment.html>