[AusNOG] Brocade and Cisco Coded EZX Optics

[Troy Baird]

Given the drop in bandwidth on FTTC nbn, 1gb fibre is all that's
required...

On Wed, 4 Mar 2020, 8:10 am Tony Wicks, <tony at wicks.co.nz> wrote:

> 120km dual fibre 1G, wow, that’s a lot of fibre for one little gig of
> capacity……
>
>
>
> *From:* AusNOG <ausnog-bounces at lists.ausnog.net> *On Behalf Of *Martijn
> Schmidt
> *Sent:* Tuesday, 3 March 2020 11:18 pm
> *To:* Jarryd Sullivan <jarryd at jcsullivan.net>; ausnog at lists.ausnog.net;
> Martijn Schmidt <martijnschmidt at i3d.net>
> *Subject:* Re: [AusNOG] Brocade and Cisco Coded EZX Optics
>
>
>
> Hey Jarryd,
>
> Flexoptix is your friend, 6 in stock at their warehouse in Germany today
> so if you don't have importing troubles they can be in Australia within a
> few days:
> https://www.flexoptix.net/en/transceiver/sfp-zx-plus-transceiver-1-gigabit-sm-1550nm-120km-32db-ddm-dom.html
>
>
> Make sure to either grab yourself a Flexbox so you can re-program them to
> the right firmware in the field, or order them pre-programmed to the
> firmware of your choice when you grab them from the website.
>
> Best regards,
> Martijn
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20200304/b18f25f4/attachment.html>