[AusNOG] NBN NCAS on Cisco 867VAE-K9

[Brett Franklin]

Hi Pouya,

We had this working on Cisco 1941 and 887VA routers last year, but have not tested on the model you specified. It is possible that it simply isn’t supported.

Thanks
Brett

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: AusNOG <ausnog-bounces at lists.ausnog.net> on behalf of Nathan Brookfield <Nathan.Brookfield at simtronic.com.au>
Sent: Tuesday, April 9, 2019 12:37:34 PM
To: dynamic.mineral at gmail.com; ausnog at lists.ausnog.net
Subject: Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9

Hi Pouya,

It is my understanding and belief that firmware that supports the vectoring required by NBN is not available for this device.  Happy to be corrected.

Kindest Regards,
Nathan Brookfield (VK2NAB)

From: AusNOG <ausnog-bounces at lists.ausnog.net> On Behalf Of Pouya Madani
Sent: Tuesday, April 9, 2019 12:28 PM
To: ausnog at lists.ausnog.net
Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9

Hi,

Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)]

I have almost tried any recommendations on AusNog, Whirpool, Cisco and many other Communities with no luck. I understand 867VAE chipset is different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but the 867VAE-K9 has not worked for me yet.

Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I have a copy of the vdsl controller and ethernet0.100 config please?

Kind Regards,
Pedro Madani
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20190409/1d66d7c0/attachment.html>