[AusNOG] Speed issues on ASR1k

Pouya Madani dynamic.mineral at gmail.com
Sat Mar 18 20:03:42 EST 2017


Thanks Michael Ill PCAP the sample session. The thing is the same session
authenticates fine on an existing LNS (7206) with same parameters and does
not experience the speed issue on 7206, but does on the asr1k

On Sat, Mar 18, 2017 at 7:27 PM, <michael at hobl.com.au> wrote:

> My first thoughts would be to check a PCAP for retransmits and ensure
> there aren't any funky burst values on the session/s you're authenticating.
>
> - Michael
>
>
> On 18 Mar. 2017 6:15 pm, Pouya Madani <dynamic.mineral at gmail.com> wrote:
>
> Hi everyone,
>
> Need thoughts on a speed issue and would appreciate if anyone might be
> able to help as I am running out of ideas.
>
> I have a new ASR1002 in production to operate as LNS but services
> authenticated are experiencing speed issues and web pages not loading
> properly. My initial thought was the MTU size but this doesnt look to be
> the root cause as authenticated services can ping (bbc.com for instance)
> by MTU size 1464 (28bit ICMP + 8bit PPP) ok, but (bbc again for example)
> web pages fail to load completely when browsed to. The sample service I am
> testing with is a 20MB EFM and speed test sits around 16MB up/down. No
> input/output errors on any of the interfaces and speed is 1000 duplex full
> on all.
>
> I would appreciate if any one can suggest anything else I might be missing
> out.
>
> Thanks in advance.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20170318/2959254e/attachment.html>


More information about the AusNOG mailing list