[AusNOG] ethernet to serial

[Nathan Brookfield]

That sounds very unusual Peter, I've literally used hundreds of them in all shapes and sizes and never run into an issue like this, it's just talking straight RS232....


Kindest Regards,

Nathan Brookfield (VK2NAB)

________________________________
From: AusNOG <ausnog-bounces at lists.ausnog.net> on behalf of Peter Tiggerdine <ptiggerdine at gmail.com>
Sent: Tuesday, 14 February 2017 6:03 PM
To: Jonathan Brewer
Cc: Ausnog
Subject: Re: [AusNOG] ethernet to serial

Some Nports have compatibility problems with Cisco switches.
Regards,

Peter Tiggerdine

GPG Fingerprint: 2A3F EA19 F6C2 93C1 411D 5AB2 D5A8 E8A8 0E74 6127


On Tue, Feb 14, 2017 at 4:57 PM, Jonathan Brewer <jon.brewer at gmail.com> wrote:
>
> On 14 February 2017 at 14:06, Phill Groom <pgroom at gmail.com> wrote:
>>
>> http://www.moxa.com/product/Terminal_Servers.htm
>>
>
> I've had some Moxa nPort devices in use for ten years now in challenging
> environments and never hesitate to recommend them.
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20170214/a0890f9e/attachment.html>