[AusNOG] Telstra Wireless IPv6 Deployment

[Karl Kloppenborg]

Well done.
I'm sure it was no easy undertaking either!

Bravo.
On Thu, 8 Sep 2016 at 10:53, Craig Askings <craig at askings.com.au> wrote:

> Fantastic effort to get here. Looking forward to getting to 100% ipv6 with
> all the wireless devices I mange.
>
> On 8 Sep 2016, at 10:20 AM, Sunny Yeung <xevious60 at gmail.com> wrote:
>
> From today, Telstra will be formally supporting Dual-Stack IPv6 on
> telstra.internet.
>
> telstra.wap can function with Dual-Stack but will be reserved for IPv6
> Single-Stack support in the near future.
>
> No new devices are being released as yet, and existing Telstra-sourced
> devices will continue to function normally with IPv4 unless manually
> configured. Telstra will provide an update to firmwares in the near future.
>
> If you choose to manually set your device to IPv6 on this APN, please make
> sure that Dual-Stack is enabled.
> Your service may not be immediately accessible using IPv6 depending on
> whether or not your service has been migrated to support IPv6. Please be
> patient.
>
> Further information on what this means for you is available on
> Crowdsupport:
>
> https://crowdsupport.telstra.com.au/t5/Telstra-IPv6-Wireless-Network/bd-p/IPv6
>
> You may contact the engineering team directly if you have specific issues.
> ipv6wirelessdeployment at team.telstra.com
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20160908/add863e8/attachment.html>