[AusNOG] nfsens + arista switches and sflow ..

[Seamus Ryan]

Hi Alex,

It has been a while since I have had to set it up from scratch (once it is setup you can just about set and forget).

When you installed nfdump did you enable sflow? Assuming you compiled it you will need to throw --enable-sflow on the configure.

Cheers,
Seamus

-----Original Message-----
From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Alex Samad - Yieldbroker
Sent: Wednesday, 27 January 2016 2:57 PM
To: ausnog at lists.ausnog.net
Subject: [AusNOG] nfsens + arista switches and sflow ..

Hi

Wondering if any one has nfsen and arista working together using sflow.

Wonder if you can share you config

I have setup 
'aristra01'     => { 'port' => '10119', 'col' => '#0000ff', 'IP' => '1.2.3.1', 'type' => 'sflow' },

sflow destination 1.2.9.3 10119
!! I have a /32 address associated with l0 sflow source-interface Loopback0 sflow run


I can see packets turning up at the nfsen box. But its not reporting them ....

Thanks

A
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog